SCAFFOLDING COMPANY


  • Work platforms
  • Scaffolding dismantling
  • Scaffolding erection
  • Scaffolding equipment supply
  • Scaffolding boards and planks
  • Scaffold tower hire on erected jobs
                  Scaffolding erection

Aluminum Scaffold Tower


We are offering a comprehensive assortment of Aluminium Scaffold Platform.  Owing to features like toughness, the provided scaffold is exceptionally valued by our precious clients. Besides being manufactured from high-grade raw material. The provided product is available with us in a multitude of sizes and shapes at affordable price.

Following are the Features:


  • Resistant against corrosion
  • High strength
  • Enhanced durability
                    Aluminum Scaffold Tower


Scaffold Towers


 Scaffold Towers are used to reduce the risks involved when working at height. It would be sensible to look into purchasing an access tower rather than risking your life by using a ladder.

Scaffold towers are manufactured with two different materials. Aluminium has relatively low density compared to steel. This makes aluminium towers and tower parts susceptible to damage during erection and packaging away. Normally, when working at heights above 2m, using standard ladders for any extensive work activities could be very dangerous.

 If you are working in a situation where you will need to move or stretch to reach outside of the center point of the stable base of a ladder. The material used during the manufacture of the scaffold tower has a large effect on the durability. Steel tower sections if given appropriate care, tend to last longer due to being more durable and less susceptible to damage.

                Speedy 80 Scaffold Tower

Cuplock System


Range of Cup lock System manufactured by us:


  • Ledger 
  • Cup lock Standard


Features of Cup lock System:


  • Rich quality
  • Dimensional accuracy
  • Available in varied specifications
  • Easy to install


Application Areas of Cup lock System:

  • Other commercial & residential areas
  • Construction Industry


Construction Scaffold Tower


We are engaged in offering a wide range of Construction Scaffold Tower.  Sophisticated technology in synchronization with industry standards. The entire range is rigorously tested on various parameters by quality controllers. This tower is manufactured using optimum grade raw-material. Keeping in mind the diverse requirements of our clients.

Following are the Features:


  • Anti corrosive
  • Durability
  • Smooth finish
                  Construction Scaffold Tower


Scaffolding specialists


Our staff are highly trained before assisting on-site as per SG4:10. Staff are CISRS trained and wear full PPE at all times.  Use of cherry picker and asbestos awareness.

 The critical safety standards that need to be enforced on each scaffolding project.  Our staff are led by a manager who has experience in maintaining.

Health and safety features include:


  • Street gantries
  • Safety netting
  • Roof edge protection
  • Bird cages
  • Hanger scaffolds

                  The side of a building with scaffolding structures

RINGER Modular Scaffolding

  • Modular joints
  • Facade scaffolding
  • Staircase tower
  • Tower scaffolding
  • Movable scaffolding
  • Plateau scaffolding
  • Passage frames
  • Supporting scaffolding
  • Special structures like stages, platforms etc for events

Cuplock Scaffolding Supplies


  • Cup lock Scaffolding Supplies
  • SAFETY WITHIN AN OFF-SHORE ENVIRONMENT.
  • RESPECT THE WEIGHT CAPACITY OF ALL SCAFFOLDING SUPPLIES.
  • CUP LOCK SYSTEM SCAFFOLDING SUPPLIES.
  • AVAILABLE FULLY GALVANIZED. 
                    Sleipner A


Thursday, 2 March 2017

Modular Scaffolding


  • Costs in comparison can be cheaper with the correct contractors and suppliers in place.
  • Customization flexibility.
  • Adaptations and modifications can be made as and when required.
  • Traditional construction can be cost saving in comparison to modular housing.
  • Energy efficiency is built into the initial design.
  • This type of construction does bode for better homes better quality and longevity.
  • When required is easy to implement with traditionally built homes

Frame Prefabricated Scaffolding with bushes


Scaffolding system made up of portal frames allowing to create bushes-equipped scaffolding to position guardrails and braces. The prefabricated bushes-equipped scaffolding is recommended for both renovations and construction. Tube and coupler scaffolding can be integrated for special operations.
Due to its simple assembly bushes-equipped prefabricated scaffolding is widely used by construction companies. Suitable for use on facades of linear buildings.

               Frame Prefabricated Scaffolding with bushes

PREFABRICATED SCAFFOLDING

                      


  • Scaffolds must be kept clear of accumulations of tools.
  • Access to scaffolds must be by standard stairs or by fixed ladders only.
  • Tools not in immediate use on scaffolds must be stored in containers to prevent tools left adrift from being knocked off.
  • Throwing objects to or dropping them from scaffolds is absolutely prohibited.
  • No scaffold may be used for the storage of materials in excess of those currently required for the job.
  • A standard guardrail and toeboard should be provided on the open side of all platforms 5 feet or more above ground.
  • No person should remain on a rolling scaffold while it is being moved.
  • Personnel must not be allowed to use damaged or weakened scaffolds.




What are the benefits of effective scaffolding?


  • Standards-based.  
  • Used to provide a student with necessary supports to accomplish a task that is not otherwise possible.
  • In alignment with learning targets.
  • Sensitive to students' strengths and challenges.
  • Respectful for all learners.
  • Applied to the process of meeting the learning target.
  • Temporary.
  • Appropriate to the task.


Light Duty Trade King Tower Features:



  • Strong 40 mm diameter vertical / horizontal welded frames. 
  • Safe and strong tower built around a folding base making it quick and easy to assemble and disassemble. 
  • Constructed from aluminium which is lightweight firm and yet strong.
  • Large 125 mm diameter height adjustable dual-locking wheels which are strong, safe and easy to move the tower. 
  • No tools are required.
  • Operate the brake mechanism and work on uneven ground and steps.


Monday, 13 February 2017

High quality scaffolding designed:


The integrity of welded seams, tension testing and force analysis are all examples. Local regulations are fully adhered to, while products even undergo independent third party testing.  The test results also published to provide an accurate and reliable record of the procedures that have been implemented. Name and approval referencing ahead of dispatch enhances a full traceability regime, with all products.

                       

Platforms - Frame Scaffold Components


  • Provide adequate sills for scaffold posts and use base plates.
  • Refer to safety regulations and standards for design and assembly requirements.
  • Erect scaffold on a base that will support all the loads that will be applied including materials and equipment.
  • Choose the right scaffold system for the job.
  • Make sure the backfill is compact and level. Replace mud and soft soil with gravel or crushed stone.
  • Erect all scaffold parts according to the manufacturer's instructions.


Quality Scaffolding,



  • Commercial - Multi-floor, electrical, clean rooms, confined spaces.
  • Industrial - Tanks, Plants, Clean rooms, Non-conducting scaffolding for electrical facilities.
  • Residential - Platforms, bays, interior, exterior, plaster, paint, siding.
            
                         

Basic Safe Work Procedures for Scaffold Erection


  • Install planks or manufactured aluminum deck.
  • Screw jacks stand end frames ensuring adequate sills or pads are used.
  • The worker on the top section must utilize fall protection equipment.
  • Each crew is equipped with a cellular telephone.
  • The crew will then discuss and fill out the required site-specific fall protection plan including rescue procedures .


EXTERIOR SCAFFOLDING SETUP INSTRUCTIONS


SCAFFOLDING SHOULD BE ERECTED BY AT LEAST TWO PEOPLE.  THESE STEP-BY-STEP INSTRUCTIONS ARE ONLY A GENERAL GUIDE. ONE PERSON SHOULD BE KNOWLEDGEABLE IN ERECTING SCAFFOLDING TO SUPERVISE THE WORK. THE FOLLOWING EXAMPLE IS BASED ON BUILDING A SCAFFOLDING THAT IS 7 X 5 FT. BY 1 FRAME HIGH.

                  Image result for Scaffolding set up - one person setup on steps

Quality Scaffolding

                   
All products are inspected throughout the many facets of the manufacturing operation. Our durable powder coating technology enables the products to withstand the challenges of harsh environments. Products are then powder coated in an advanced spray powder system to maximize coating efficiency and uniformity. Universal's automatic laser tube processing center converts the raw tubing with any geometry necessary to produce the specific parts needed.


                  

Standard Features of scaffolding


  • Outriggers provide additional stability.
  • Handrails are telescopic.
  • End rails enclose the workspace to provide fall protection to all sides.
  • The innovative plank locking device provides a solid connection.
  • Handrails have pivotal graspers that provide adjustment at connection.
                          Outriggers

SCAFFOLDING REVIEW FOR THE HOMEOWNER

               

Provides a safe and expedient alternative to using an extension ladder.  Scaffolding can be purchased in single sets or as complete units.My house has four gables on it. The rear gable is the only one that is accessible without a ladder or scaffolding. I recently purchased a rolling 30-ft. tower scaffolding from an online supplier  that I used while painting my house.

                  scaf 1

Guide Prices For Scaffolding Hire



  • Scaffold Over Conservatory
  • Entire House Detached With Tin Hat
  • One Side of House 10 Metres Long up to First Floor
  • Cost to Scaffold Around a Chimney
  • Entire House Semi Detached
                      Easy scaffold system to chimney


Step, Platform and Trestle Ladder Scaffolds


  • Make sure these scaffolds must not be bridged one to another.
  • Verify scaffold platforms are placed no higher than the second-highest rung.
  • Ensure ladders are prevented from slipping by how they are placed.
  • Check that all ladders meet the requirements of 1926 Subpart X.
                        crawling board

Endlok Tube and Clamp Advantages:


  • Tube and Clamp adapts quickly to the most complex jobs.
  • The Endlok Tube and Clamp system safely saves time and labor costs.
  • Our Tube and Clamp Endlok system has interchangeable components.
  • Tube and Clamp provides complete flexibility with ease of safe assembly.
  • Our Tube and Clamp is simple to build.


                             

Contracting: Scaffolding



In the world of contracting quality is of utmost importance as the stuctures. Be it industrial infrastructure sector.  We provide high quality contracting with highest integrity maintained at every level. Principle contractors and subcontractors to ensure quality construction and completion of the project at hand. We create anatmosphere of credible productivity by liaising smoothly with clients.

                       

Product Information of Trade Folding Tower


  • Based on the robust industrial tower specification.
  • Complies to BS1139  1994 BSEN 1004.
  • 1 piece Folding toe-board set.
  • Made from 2" Tube & has a max Load Per Platform of 275kg.
  • Fits easily into most small vans or estate cars.
  • Base can be used alone.
  • Quick and easy to erect!
  • Colour coded braces for easy assembly 

Trade Scaffolding Towers


These scaffold towers extend to heights of 12m platform height and 14m working height.  While anyone can use these Scaffolding. Tower can be built and used working inside the tower at all times to provide continued protection. Towers our customers include builders  interior designers and landscapers. Whatever your occupation. Industry these Scaffolding Towers will address your needs. For safety the platforms have a trap door for climbing through.


                                         GDA300 Trade Scaffold Tower 1.9Metres     

Risk with scaffolds :


  • Falls from heights.
  • Scaffolding collapse.
  • Manual tasks.
  • Work near overhead electric lines.
  • Falling objects


Tuesday, 17 January 2017

Scaffolding

           

                         Scaffolding

TOWER RANGE SCAFFOLDING


  • Euro Towers manufacture many types of Aluminium Access Tower.
  • The first method of assembly is ‘Through-The-Trap.
  • This allows the person building the tower to position them self at minimum risk during the installation of guard rails to the next level.
  • The second method is an advanced guard rail system.
  • The temporary guard rail units provide collective fall prevention.

Cantilever Aluminum Scaffolding System


  • Cantilever Length: 1800mm, 2500mm, 3000mm
  • Cantilever Width: 750mm
  • Working Height: 8600mm, 6650mm 
 FOLLOWING ARE THE FEATURES:
  • Access to out of reach areas.
  • Allows increased platform width.
                                        Cantilever Aluminum Scaffolding System

Rental Aluminium Scaffolding

Following are the Features:


  • Enhanced rigidity
  • Premium finish
  • Light frame
  • Frame widths: 850m
  • Safe working load of 275 kg per platform level up to maximum of 950 kg.
  • 3T- Through the trap build method
  • 2 deck lengths: 1.8m 
  • Patented double action trigger operated locking claws.

Mobile Access Towers Course Description


  • Health & safety requirements.
  • Inspection of Mobile Access Towers
  • Hazard identification.
  • Introduction to SOLAS CSCS or PASMA scheme.
  • Stability of Mobile Access Towers.
  • Practical erection dismantling.
  • Function and checking of components prior to use
  • Written and practical test

Our team comprises the following members:


  • Engineers
  • Technocrats
  • Raw material procurers
  • Quality controllers
  • Warehousing experts
  • R&D personnel
  • Packaging experts


Monday, 2 January 2017

Universal System Scaffold


  • Hot-dipped galvanized
  • No measurement needed
  • Pre-measured components
  • Erected quickly and easily
  • Rigid and safe
  • Can be used in conjunction with tube and clamp scaffolding
  • Conforms to any angle or curve
  • Maintenance free